| No. | Brand | J | a | E | b | w | U | A | L |
| BCCF 1 3/4 S | MCGILL | - | - | - | - | - | - | - | - |
| CCF 2 1/2 S | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 3/4 SB | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 1/2 B | MCGILL | - | - | - | - | - | - | - | - |
| MCF 90 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 3 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 3/4 S BULK | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 1/4 | MCGILL | - | - | - | - | - | - | - | - |
| CF 5 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 4 S | MCGILL | - | - | - | - | - | - | - | - |
| CCF 2 1/4 S | MCGILL | - | 6 mm | - | - | - | - | - | - |
| CCF 11/16 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 1/8 | MCGILL | - | - | - | - | - | - | - | - |
| CF 1/2 N S | MCGILL | - | - | - | - | - | - | - | 197 mm |
| CFH 1 5/8 | MCGILL | - | - | - | - | - | - | - | - |
| CFH 5/8 B | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 1/2 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 7/8 | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 1/4 S | MCGILL | - | - | - | - | - | 20 mm | - | - |
| CFH 2 1/2 | MCGILL | - | - | mm | 14 mm | - | - | - | - |
| CCF 1/2 S | MCGILL | - | - | - | - | 60 mm | - | - | - |
| PCFE 4 | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 1/2 S | MCGILL | - | - | - | 10 mm | - | - | - | - |
| CFH 2 3/4 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 3/8 | MCGILL | - | - | - | - | - | - | - | - |
| CCF 5 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 3/4 S | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 2 1/2 S | MCGILL | - | - | - | - | - | - | - | - |
| MCGILL PCFE 2 1/4 Cam Follower and Track Roller - Stud Type | R1:5.5 mm; Housing material:Cast iron; SWN:11.113 mm; H1:82.6 mm; Rα:45 °; B:73.3 mm; J min.:203 mm; RG:1/8-27 NPT; Bearing:YAR 215-212-2F; L:279 mm; |
| MCGILL CFH 3/4 Cam Follower and Track Roller - Stud Type | R2:19.05 mm; Cap bolt:2 x 1/2-13 UNC; J1:47.625 mm; P180°:16.9 kN; Bearing:1312 ETN9; Cap bolt, SAE grade:8; dc:57.15 mm; PG:1/8 NPT; db:73.025 mm; Pa:10.7 kN; |
| MCGILL CFH 1 1/8 SB Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:2.00 mm; B:44.45 mm; Basic Static Radial Load Rating Co:38000 N; Basic Dynamic Radial Load Rating C:61800 N; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; d:50.000 mm; Accessories:Removable Metal Shie; Grease Speed Rating Open/Shielded n1:6300 rpm; |
| MCGILL CCF 1 1/8 SB Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:190 kg; B1:212 mm; Da max.:602 mm; r1,2 min.:5 mm; Basic static load rating C0:6000 kN; K:12 mm; Calculation factor Y0:2.8; Basic dynamic load rating C:3541 kN; db min.:437 mm; d2 ≈:487 mm; |
| MCGILL CFH 1 1/2 Cam Follower and Track Roller - Stud Type | Basic static load rating C0:17.6 kN; U:16 mm; Fatigue load limit Pu:2.12 kN; Fw:16 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 16x22x3; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 16x22x3; Reference speed:22000 r/min; Limiting speed:26000 r/min; |
| MCGILL CFH 1 5/8 B Cam Follower and Track Roller - Stud Type | Grease:1 000 min-1; Pu:22.070 kN; d:220 mm; rs (min):1.1 mm; Oil:1 300 min-1; D:270 mm; D1:223 mm; dynamic Cr:200.090 kN; static Cor:760.000 kN; d1:267 mm; |
| MCGILL CFH 9/16 SB Cam Follower and Track Roller - Stud Type | Taconite seal:TER 38; Max. speed for Taconite seal:1250 r/min; L:285.75 mm; J1:47.625 mm; PG:1/8 NPT; h:28.575 mm; R1:46.038 mm; P90°:45.4 kN; Initial grease fill:68.04 g; Housing:FSAFS 515; |
| MCGILL CFH 4 Cam Follower and Track Roller - Stud Type | Static (Cor):3.745 kN; da:19 min; ra:0.6 max; D:35 mm; Oil:24 000 min-1; Bearing designation:62202 ; Pu:0.170 kN; Weight:0.054 kg; B:14 mm; Da:31 max; |
| MCGILL CFH 3 1/4 S Cam Follower and Track Roller - Stud Type | Dynamic (Cr):12 mm; rs (min):5 mm; with tapered bore:1 100 min-1; Static (Cor):22.3 mm; d:190 mm; B:132 mm; Oil:247.710 kN; Pu:2030 kN; with cylindrical bore:850 min-1; D:400 mm; |
| MCGILL CF 1/2 S Cam Follower and Track Roller - Stud Type | Preload class A GA:40 N; Db max.:39.6 mm; Preload class B GB:120 N; r3,4 min.:0.3 mm; Calculation factor fHC:1; Attainable speed for grease lubrication:54000 r/min; a:10.2 mm; Static axial stiffness, preload class C:44 N/µm; rb max.:0.3 mm; Basic static load rating C0:3.35 kN; |
MCGILL CCFH 7/8 S Cam Follower and Track Roller - Stud Type Video