| No. | Brand | J | a | E | b | w | U | A | L |
| CCF 11/16 SB | MCGILL | - | - | - | - | - | - | - | - |
| CCF 2 1/4 S | MCGILL | - | 6 mm | - | - | - | - | - | - |
| CFH 1/2 SB BULK | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 3/4 S | MCGILL | - | - | - | - | - | - | - | - |
| CCF 5 S | MCGILL | - | - | - | - | - | - | - | - |
| CF 1/2 N S | MCGILL | - | - | - | - | - | - | - | 197 mm |
| CFH 1 3/4 S BULK | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 5/8 S | MCGILL | - | - | - | - | - | - | - | - |
| CCF 1 3/8 S | MCGILL | - | - | - | 3 mm | - | - | - | - |
| CFH 5/8 B | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 1/2 | MCGILL | - | - | mm | 14 mm | - | - | - | - |
| CFH 1 | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 1 1/8 S | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 3 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 3 S | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 2 S | MCGILL | - | 542 mm | - | - | - | - | - | - |
| CCFH 9/16 SB | MCGILL | - | - | - | - | - | - | - | - |
| CFH 3 1/2 | MCGILL | - | - | - | - | - | - | - | - |
| CCFH 4 SB | MCGILL | - | - | - | - | - | - | - | - |
| PCFE 3 | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 3/8 | MCGILL | - | - | - | - | - | - | - | - |
| BCCF 2 1/2 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 B | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 1/2 S | MCGILL | - | - | - | 10 mm | - | - | - | - |
| CCF 1/2 SB BULK | MCGILL | - | 36.627 mm | - | - | - | - | - | - |
| CFH 2 3/4 | MCGILL | - | - | - | - | - | - | 30 mm | - |
| CF 5/8 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 9/16 SB | MCGILL | - | - | - | - | - | - | - | 285.75 mm |
| MCGILL CFH 9/16 S Cam Follower and Track Roller - Stud Type | D:37.0000 mm; Grease Speed Rating Open/Shielded n1:21000 rpm; Oil Speed Rating Open/Shielded n2:26000 rpm; Basic Dynamic Radial Load Rating C:7800 N; Basic Static Radial Load Rating Co:3550 N; Fillet Radius ra:0.51 mm; d:15.000 mm; B:9.00 mm; |
| MCGILL CCFH 5/8 S Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v max.:1 m/s; B:9.8 mm; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; D:37 mm; Mass bushing:0.02 kg; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Specific static load factor K0:120 N/mm²; d:32 mm; |
| MCGILL CCFH 9/16 SB Cam Follower and Track Roller - Stud Type | B4:35.712 mm; Sleeve:S 144x7.1/2; d3 max.:279.527 mm; d:220 mm; Mass adapter sleeve assembly:21 kg; Lock nut:N 44; Lock washer:W 44; B1:183.566 mm; Hydraulic nut:HMVC 44E; Threads per inch:8; |
| MCGILL CCF 1 1/8 SB Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:190 kg; B1:212 mm; Da max.:602 mm; r1,2 min.:5 mm; Basic static load rating C0:6000 kN; K:12 mm; Calculation factor Y0:2.8; Basic dynamic load rating C:3541 kN; db min.:437 mm; d2 ≈:487 mm; |
| MCGILL CCF 11/16 S Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Fillet Radius ra:2.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:163000 N; Basic Static Radial Load Rating Co:220000 N; d:120.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3200 rpm; B:56.00 mm; |
| MCGILL VCFE 3 1/2 Cam Follower and Track Roller - Stud Type | l7 min.:68 mm; C1 max.:39 mm; B:44 mm; d4 ≈:82 mm; dk:80 mm; d:60 mm; Basic static load rating C0:400 kN; w:70 mm; l5 ≈:35 mm; d2 max.:137 mm; |
| MCGILL CFH 5/8 Cam Follower and Track Roller - Stud Type | d2 (max):136.5 mm; b:10 mm; b1:17.5 mm; E:168.8 mm; d2:105 mm; Dynamic (Ca):200 kN; Pu:24.310 kN; rs (min):2.1 mm; r1s (min):2.1 mm; B:36 mm; |
| MCGILL CFH 9/16 SB Cam Follower and Track Roller - Stud Type | Taconite seal:TER 38; Max. speed for Taconite seal:1250 r/min; L:285.75 mm; J1:47.625 mm; PG:1/8 NPT; h:28.575 mm; R1:46.038 mm; P90°:45.4 kN; Initial grease fill:68.04 g; Housing:FSAFS 515; |
| MCGILL CFH 5/8 B BULK Cam Follower and Track Roller - Stud Type | Oil:38.910 kN; with tapered bore:3 800 min-1; with cylindrical bore:3 000 min-1; Dynamic (Cr):3 mm; B:36 mm; D:150 mm; d:85 mm; Pu:260 kN; rs (min):2 mm; Static (Cor):5.5 mm; |
| MCGILL VCFE 4 1/2 Cam Follower and Track Roller - Stud Type | T:45.9 mm; Housing material:Composite; Thread grub screw G2:M6x0.75; J:99 mm; Recommended diameter for attachment bolts, mm G:10 mm; A:30 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; B4:4.75 mm; End cover:ECY 205; |
MCGILL CFH 5/8 S Cam Follower and Track Roller - Stud Type Video