| MCGILL BCCF 2 1/2 S Cam Follower and Track Roller - Stud Type | Width Plain C2:377000 N; Grease Speed Rating n1:1400 rpm; B:110.00 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating 40º C1:351000 N; d:190.000 mm; Shielded or Sealed Co2:500000 N; Basic Static Radial Load Rating 15º Co1:570000 N; Oil Speed Rating n2:1900 rpm; |
| MCGILL CCF 1 3/8 SB DRAWING# 5504408 Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:16000 rpm; Oil Speed Rating Open/Shielded n2:19000 rpm; Shielded or Sealed B1:11.1 mm; Basic Dynamic Radial Load Rating C:9360 N; Sealed Speed Rating n3:11000 rpm; Fillet Radius ra:0.79 mm; d:19.100 mm; Width Plain B:7.9 mm; Basic Static Radial Load Rating Co:5100 N; D:41.3000 mm; |
| MCGILL CFH 1 3/8 Cam Follower and Track Roller - Stud Type | Lock nut:KML 26; Locking device:MBL 26; d3:155 mm; B4:23 mm; d:130 mm; G:M 130x2; B1:92 mm; Mass adapter sleeve assembly:3.65 kg; B:21 mm; d1:115 mm; |
| MCGILL BCCFE 3/4 SB Cam Follower and Track Roller - Stud Type | Initial grease fill:87.885 g; P60°:138 kN; N1:19.05 mm; Ca:42.799 mm; R1:53.181 mm; Mass pillow block:21.3 kg; R2:21.431 mm; Labyrinth ring:2 x LOR 43; ba:34.131 mm; Pa:7.83 kN; |
| MCGILL CFH 3 1/4 S Cam Follower and Track Roller - Stud Type | Dynamic (Cr):12 mm; rs (min):5 mm; with tapered bore:1 100 min-1; Static (Cor):22.3 mm; d:190 mm; B:132 mm; Oil:247.710 kN; Pu:2030 kN; with cylindrical bore:850 min-1; D:400 mm; |
| MCGILL VCFE 4 1/2 Cam Follower and Track Roller - Stud Type | T:45.9 mm; Housing material:Composite; Thread grub screw G2:M6x0.75; J:99 mm; Recommended diameter for attachment bolts, mm G:10 mm; A:30 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; B4:4.75 mm; End cover:ECY 205; |
| MCGILL CFH 1 7/8 S Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:34100 N; Grease Speed Rating n1:7500 rpm; D:62.0000 mm; Oil Speed Rating n2:10000 rpm; Basic Static Radial Load Rating Co:30500 N; Accessories:Shield & Seal; B:25.40 mm; Fillet Radius ra:1.00 mm; d:25.000 mm; Sealed Speed Rating n3:7500 rpm; |
| MCGILL CFH 1 1/2 Cam Follower and Track Roller - Stud Type | Basic static load rating C0:17.6 kN; U:16 mm; Fatigue load limit Pu:2.12 kN; Fw:16 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 16x22x3; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 16x22x3; Reference speed:22000 r/min; Limiting speed:26000 r/min; |
| MCGILL PCFE 2 3/4 Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:81500 N; B:52.40 mm; Oil Speed Rating n2:5000 rpm; Accessories:One Shield & Snap-Ri; D:120.0000 mm; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:106000 N; Sealed Speed Rating n3:3800 rpm; d:55.000 mm; Fillet Radius ra:2.00 mm; |
| MCGILL CFH 1/2 B Cam Follower and Track Roller - Stud Type | Threads per inch:8; B1:156.921 mm; Sleeve:S 134x6; Lock washer:W 34; B:27.254 mm; Lock nut:AN 34; d:170 mm; d3 max.:219.989 mm; B4:30.963 mm; d1:152.4 mm; |