| No. | Brand | J | a | E | b | w | U | A | L |
| CFH 1 5/8 SB | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1/2 SB BULK | MCGILL | - | - | - | - | - | - | - | - |
| CFH 11/16 | MCGILL | - | - | - | - | - | - | - | - |
| CCF 6 S | MCGILL | - | - | - | - | - | 13 mm | - | - |
| CFH 3 1/4 SB | MCGILL | - | - | - | - | - | - | - | - |
| CF 5 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1/2 | MCGILL | - | - | - | - | - | - | - | - |
| CCF 2 1/4 S | MCGILL | - | 6 mm | - | - | - | - | - | - |
| CFH 1 3/8 B | MCGILL | - | - | - | - | - | - | 68.263 mm | 234.95 mm |
| CFH 1 5/8 | MCGILL | - | - | - | - | - | - | - | - |
| CCFH 9/16 S | MCGILL | - | - | - | - | - | - | 363 mm | 880 mm |
| CFH 1 3/8 | MCGILL | - | - | - | - | - | - | - | - |
| CF 1/2 N S | MCGILL | - | - | - | - | - | - | - | 197 mm |
| BCCF 1 1/4 SB | MCGILL | - | - | - | 22.3 mm | - | - | - | - |
| CCFH 5/8 SB | MCGILL | - | 10.9 mm | - | - | - | - | - | - |
| CFH 1 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1 7/8 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 11/16 B | MCGILL | - | - | - | - | - | - | - | - |
| CCF 1/2 SB BULK | MCGILL | - | 36.627 mm | - | - | - | - | - | - |
| CFH 3/4 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 1/2 S | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 1/4 B | MCGILL | - | - | - | - | - | - | - | - |
| CFH 2 | MCGILL | - | - | - | - | - | - | - | - |
| MCGILL CCF 1 1/4 S Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:41500 N; D:140.0000 mm; B:20.00 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:100.000 mm; Sealed Speed Rating n3:2700 rpm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:42300 N; Grease Speed Rating Open/Shielded n1:4500 rpm; |
| MCGILL CFH 2 1/2 B Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:500000 N; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1900 rpm; Grease Speed Rating n1:1100 rpm; d:240.000 mm; Basic Dynamic Radial Load Rating C:332000 N; D:390.0000 mm; B:55.00 mm; |
| MCGILL CCF 1 1/8 SB Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:190 kg; B1:212 mm; Da max.:602 mm; r1,2 min.:5 mm; Basic static load rating C0:6000 kN; K:12 mm; Calculation factor Y0:2.8; Basic dynamic load rating C:3541 kN; db min.:437 mm; d2 ≈:487 mm; |
| MCGILL CFH 9/16 SB Cam Follower and Track Roller - Stud Type | Taconite seal:TER 38; Max. speed for Taconite seal:1250 r/min; L:285.75 mm; J1:47.625 mm; PG:1/8 NPT; h:28.575 mm; R1:46.038 mm; P90°:45.4 kN; Initial grease fill:68.04 g; Housing:FSAFS 515; |
| MCGILL CFH 2 3/4 S Cam Follower and Track Roller - Stud Type | r, r1,2 min.:0.6 mm; d:35 mm; Mass inner ring:0.12 kg; F:42 mm; B:36 mm; |
| MCGILL CFH 11/16 Cam Follower and Track Roller - Stud Type | d:200.000 mm; Basic Dynamic Radial Load Rating C:76100 N; B:24.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Grease Speed Rating Open/Shielded n1:2200 rpm; Sealed Speed Rating n3:0 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:95000 N; Accessories:One Shield; D:250.0000 mm; |
| MCGILL BCF 1/2 N SB Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:695000 N; D:300.0000 mm; d:140.000 mm; Basic Dynamic Radial Load Rating C:488000 N; Grease Speed Rating n1:1400 rpm; Fillet Radius ra:3.00 mm; B:124.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1900 rpm; |
| MCGILL BCCF 1 1/2 S Cam Follower and Track Roller - Stud Type | Dimension S1:0.8750 in; Dimension D2:2.6875 in; Dimension L:4.3125 in; Dimension H:1.0000 in; Dimension J:0.3125 in; Shaft Diameter D:1 1/8 in; Width A:1.3750 in; Insert Bearing IB:ZMaRC; Dimension B:4.1250 in; Basic Static Radial Load Rating Co:2520 lbf; |
| MCGILL CCF 1/2 N S Cam Follower and Track Roller - Stud Type | Cap bolt recommended tightening torque:515.2 N·m; Max. speed for PosiTrac Plus seal:2150 r/min; Pa:9.43 kN; Cap bolt:2 x 3/4-10 UNC; Ca:67.793 mm; ba:36.513 mm; Stabilizing ring:2 x SR-1616; P60°:85.9 kN; P90°:51.6 kN; Initial grease fill:365.71 g; |
| MCGILL CFH 1/2 S Cam Follower and Track Roller - Stud Type | Calculation factor (back-to-back, face-to-face) X2:0.67; D1:69.75 mm; Static axial stiffness, preload class A:104 N/µm; Preload class C GC:800 N; Preload class A GA:130 N; ra max.:1 mm; Da max.:75.4 mm; Attainable speed for oil-air lubrication:34000 r/min; d2:57.9 mm; Fatigue load limit Pu:0.425 kN; |
MCGILL BCCF 1 SB Cam Follower and Track Roller - Stud Type Video