| MCGILL BCCF 2 S Cam Follower and Track Roller - Stud Type | rb max.:4 mm; D1 ≈:1569 mm; Basic dynamic load rating C:1990 kN; a:542 mm; ra max.:8 mm; Limiting speed:0 r/min; Reference speed:240 r/min; r3,4 min.:5 mm; Mass bearing:1600 kg; B:218 mm; |
| MCGILL CFH 1/2 S Cam Follower and Track Roller - Stud Type | Calculation factor (back-to-back, face-to-face) X2:0.67; D1:69.75 mm; Static axial stiffness, preload class A:104 N/µm; Preload class C GC:800 N; Preload class A GA:130 N; ra max.:1 mm; Da max.:75.4 mm; Attainable speed for oil-air lubrication:34000 r/min; d2:57.9 mm; Fatigue load limit Pu:0.425 kN; |
| MCGILL CFH 2 1/2 B Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:500000 N; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1900 rpm; Grease Speed Rating n1:1100 rpm; d:240.000 mm; Basic Dynamic Radial Load Rating C:332000 N; D:390.0000 mm; B:55.00 mm; |
| MCGILL CFH 1 7/8 B Cam Follower and Track Roller - Stud Type | Cap bolt:2 x 3/4-10 UNC; A1:120.65 mm; P90°:89 kN; Cap bolt, SAE grade:5; P60°:149 kN; P180°:60.9 kN; R1:67.945 mm; PG:1/4 NPT; J1:69.85 mm; Cap bolt recommended tightening torque:203.4 N·m; |
| MCGILL CCF 1/2 S Cam Follower and Track Roller - Stud Type | dk:66 mm; l7 min.:60 mm; B:35 mm; l4 max.:254 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d:50 mm; w:60 mm; G:M 52x3; r1 min.:0.6 mm; |
| MCGILL CFH 1 3/8 B Cam Follower and Track Roller - Stud Type | d2:101.6 mm; Mass bearing unit:7.26 kg; J min.:173.037 mm; H2:44.45 mm; A1:88.9 mm; L:234.95 mm; A:68.263 mm; Basic dynamic load rating C:148 kN; H:142.875 mm; da:63.5 mm; |
| MCGILL CFH 1 1/2 Cam Follower and Track Roller - Stud Type | Basic static load rating C0:17.6 kN; U:16 mm; Fatigue load limit Pu:2.12 kN; Fw:16 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 16x22x3; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 16x22x3; Reference speed:22000 r/min; Limiting speed:26000 r/min; |
| MCGILL CFH 1 Cam Follower and Track Roller - Stud Type | Mass bearing:0.18 kg; Basic dynamic load rating C:14.3 kN; d1 ≈:26.15 mm; D1 ≈:37.2 mm; D:47 mm; d:17 mm; Fatigue load limit Pu:0.19 kN; B:19 mm; Calculation factor Y0:1.3; ra max.:1 mm; |
| MCGILL CFH 2 1/4 B Cam Follower and Track Roller - Stud Type | PosiTrac Plus contact element:2 x B10724-44; Max. speed for PosiTrac Plus seal:2150 r/min; H2:31.75 mm; A1:88.9 mm; Cap bolt, SAE grade:5; P90°:49.8 kN; Housing:SAF 516; PG:1/8 NPT; Initial grease fill:87.885 g; A2:126.603 mm; |
| MCGILL CCF 6 S Cam Follower and Track Roller - Stud Type | Fw:32 mm; Reference speed:13000 r/min; Basic dynamic load rating C:14.7 kN; Mass needle roller and cage assembly:0.018 kg; U:13 mm; Fatigue load limit Pu:3 kN; Limiting speed:14000 r/min; Ew:37 mm; Basic static load rating C0:25.5 kN; |